How much liquid water might a half-kilometre-wide cumulus cloud contain?
A cloud looks light. Estimating the water in its droplets means separating its enormous volume from the tiny amount of liquid in each cubic metre.
Count only the liquid droplets, excluding air and water vapour. Start with a 500 m width and approximate its volume using assumed length and thickness; this is not a measured cloud.
Choose your anchors first
- Width: 500 m. Assume another 500 m in length and an effective thickness of 200 m.
- Liquid water content: 0.5 g/m³, the illustrative reference discussed by USGS.
- Convert grams to kilograms to express the result.
Open the worked reasoning
Convert the volume to metres
Approximate the cloud with a 500 × 500 × 200 m box: 50,000,000 m³. The 200 m is an assumed effective thickness, not a measurement. Width alone does not determine volume.
Add up the droplets
Using our chosen reference, each cubic metre contributes half a gram of liquid. Multiplying by volume adds up the water scattered throughout the cloud.
Change units
25,000,000 g is 25,000 kg, or about 25 metric tonnes of liquid water. The immense volume makes even a low concentration add up.
What could change the answer?
The result depends on the model. Keeping the volume fixed and trying 0.2–1 g/m³ as sensitivity scenarios gives 10–50 tonnes. That interval is not a measured range for all clouds. Real liquid water content varies, and the assumed thickness also changes the mass.
What this example teaches
The decisive anchor is liquid content per volume. Treating a cloud as a solid block of water would produce a very different result: the droplets are dispersed in air.
Source and scope
- USGS · Water Science School ↗USGS discusses the illustrative 0.5 g/m³ reference. This example’s geometry, thickness and sensitivity scenarios are Aprox assumptions.
Source checked: 2026-10-21. Calculations and model wording by Aprox.